Maintenance
32
www.hyundaipowerproducts.co.uk
01646 687 880
sales@hyundaipowerproducts.co.uk
Cleaning
Carefully clean the underside of the deck with a stiff brush after each cut.
1
Remove the grass debris and mud accumulated inside the deck to prevent it drying.
2
Remove the belt casing by removing the screws and clean around the transmission and drive
belts with a brush or compressed air once or twice a year.
3
Always remove the electric plug from the mains supply, before any cleaning is undertaken.
DO NOT: Use water on any part of the main machine. Holes in the grass box can become
filled with dirt and dust during use and will become less efficient at grass collection. To
prevent this, regularly hose the catcher off with water and let dry before using. Keep the top of
the motor housing vents clear and clean of grass clippings and dust. This will assist motor air
flow and extend the machine life.
4
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage
from various types of commercial solvents and may be damaged by their use. Use a clean
cloth to remove dirt, grease, etc.
Transportation
Wear sturdy work gloves.
1
Hold the machine at the points that offer a safe grip, taking into account the weight and
relative distribution of the same.
2
Use an appropriate number of people for the weight of the machine and the characteristics of
the vehicle or the place where it must be placed or collected.
3
Whenever the machine is to be handled, lifted, transported or moved, you must:
You must make sure that machine movements to not cause damage or injuries.
4
During transport, make sure to fasten the machine securely with cables or straps.
5
The machine must be transported on a flat surface.
6
