Troubleshooting
Problem
Possible Cause
Possible Solution
Lawnmower will not start.
Fuse in mains plug blown /
faulty.
Check fuse in mains plug and
replace fuse if necessary.
Loose connection in switch
box.
Check connection within the
switch box on the handle bars.
Internal wiring fault.
Contact your service dealer.
Lawnmower functions
intermittently.
Internal wiring fault.
Contact your service dealer.
Lawnmower does not cut
grass cleanly / or motor
labours.
Cutting blade is blunt.
Turn lawn mower upside down
to check blade edge
connection - If blunt, take to a
specialist to sharpen or
replace blade.
Cutting height is incorrect
Adjust cutting height to suit
grass length.
Possible clogging underneath. Turn lawnmower upside down
to check for built up grass
clippings around the blade and
grass discharge chute.
Blade fitted upside down.
Remove and refit blade
correctly.
Excessive noise / vibration.
Blade nut / bolt loose.
Turn lawnmower upside down
and tighten nut / bolt.
Blade damaged / bent.
Check blade condition -
Replace if necessary.
Maintenance
33
www.hyundaipowerproducts.co.uk
01646 687 880
sales@hyundaipowerproducts.co.uk