Hyundai power products HYM3800E, Instruction Manual

  12

For Safe Operation

     During Use

1.

You must only work in daylight or with good

artificial light in good visibility conditions. Keep
people, children and animals away from the
working area.

2.

Avoid mowing wet grass. Do not work in the

rain or when there is a thunderstorm or
lightning risk. If there is bad weather
conditions, do not use the machine.

3.

Make sure on slopes you have a steady

foothold.

4.

Do not allow the lawnmower to pull you

along, you must walk and never run.

5.

You must pay special attention when

approaching obstacles that could compromise
visibility.

6.

When mowing on slopes, you must mow

across the slope and not up and down it.
When changing direction, you need to be
careful that the wheels do not hit any
obstacles (such as roots, branches, stones,
etc) that can cause the lawnmower to slide
sideways or make you lose control of it.

7.

The lawnmower must never be used on

slopes of over 20°, regardless of the mowing
direction.

8.

Be very careful when pulling the

lawnmower toward you. You must look behind
you to make sure there are no obstacles
before and during operations in reverse.

9.

You must immobilise the blade if the

machine must be inclined for transport, when
moving over surfaces other than grass
and when the lawnmower is transported from
or to an area that must be cut.

10.

When using the machine near roads, pay

attention to traffic.

!

11.

Do not operate the machine with damaged

guards or without the grass collector, side 
discharge guards or rear discharge guards.

12.

You must be careful near ravines, ditches

or embankments.

13.

Follow the instructions to start the

machine

carefully whilst keeping feet away

from the 

blade.

14.

Never incline the lawnmower whilst

starting. Start the machine on a flat surface

without obstacles or high grass.

15.

Do not place your hands or feet near or

under rotating parts. Keep away from the

discharge opening.

16.

If the lawnmower is running, do not lift or

transport.

17.

Do not tamper with or disable safety

systems.

18.

The motor parts get very hot when

running, 

do not touch. Danger of burns.

19.

Only use manufacturer-recommended

attachments.

20.

If the attachments/tools are not installed in

their seats, do not use the machine.

21.

You must disengage the blade, switch off

the machine and unplug from the mains
(making sure that all moving parts are

stationary):

- When transporting the machine
- Whenever you leave the machine
unattended
- Before clearing blockages or unclogging the
discharge chute
- Before cleaning, checking or working on the
machine
- After striking a foreign object you must,
inspect the machine for damage and make
repairs before using it again.