17
Starting / Stopping Procedure
Before Each Use
• Always ensure that the lawnmower is in a safe
working condition. Inspect the blade, check
safety devices and guards and check all nuts,
bolts and screws are secure.
•
Use outdoor extension leads. Always use an
approved cable extension suitable for the
power rating of this tool, the conductor size
should also be at least the same size as that
on the machine, or larger. When using a cable
reel, always unwind the cable completely. We
strongly recommend that this machine is
connected to the mains supply via a Residual
Current Device (RCD).
Only start the lawnmower on even
ground and not in long grass. The ground
must be free of foreign bodies, such as
stones. Do not lift the lawnmower to start
it.
!
STEP 1
Press the start button on the switch /
connector combination and hold it down.
Starting Procedure
STEP 2
Make sure the blade is free of long grass and
the cutting height is set to maximum (the
highest option).
Pull back the Operator Presence Control
(OPC) lever towards the main handle.
STEP 3
STEP 1
Release the Operator Presence Control (OPC)
lever and the motor will stop.
After Each Use
• Examine the blade for damage.
• Clean the machine if necessary, go to page
22 for more information on how to clean your
machine.
CAUTION - The motor will remain hot
for a while after use. Ensure the machine
has cooled before carrying out any
maintenance or storage.
!
Stopping Procedure
Summary of Contents for HYM3800E
