www.hyundaipowerproducts.co.uk
01646 687 880
aftersales@hyundaipowerproducts.co.uk
Maintenance
The Blade
You
MUST
wear gloves to protect your hands from being cut when working with the blade.
1
The blade is made of pressed steel, in order to obtain a good cut, sharpen the blade frequently,
typically around every 25 hours of work.
2
Following blade sharpening, you must make sure that the blade is always well balanced.
3
To remove the blade, unscrew the centre bolt, check the blade carrier and all components.
Replace if they are worn or damaged.
4
42
WARNING
• Never touch a rotating blade.
• Check the blade in order to get a good cut. The blade should always be sharp and well
balanced. At regular intervals, check the tightness of all nuts, bolts and screws.
• If the blade hits an obstacle, check for damage and if the machine vibrates badly, stop the
lawnmower and take it to a service dealer.
!
It is best if all interventions on the blade are done at a specialised centre that has the special
tools and equipment.
5
Only original blades must be used on this machine. Given product evolution, the blades may
be replaced in time with others having similar interchangeable and operating safety features.
6
