www.hyundaipowerproducts.co.uk
01646 687 880
aftersales@hyundaipowerproducts.co.uk
Safety Information
6
Inspect Your Machine
• Check your machine before starting it. Keep guards in place and in working order. Make
sure all nuts, bolts, etc., are securely tightened.
•
You must check the general condition of the machine before use.
•
Never operate the machine when it is in need of repair or is in poor mechanical condition.
Replace damaged, missing, or failed parts before using it. Check for fuel leaks. Keep the machine
in safe working condition.
•
Do not use the machine if the engine’s switch does not turn off the engine when running. Any
petrol powered machine that can’t be controlled with the engine switch is dangerous and must
be replaced.
•
Regularly check to see that keys and adjusting wrenches are removed from the machine area
before starting it. A wrench or a key that is left attached to a rotating part of the machine may
result in personal injury.
•
If the machine should start to vibrate abnormally, stop the engine and check immediately for the
cause. Vibration is generally a warning sign of trouble.
•
Avoid accidental starting. Be sure the engine’s switch is off before transporting the machine or
performing any maintenance or service on the unit. Transporting or performing maintenance or
service on a machine with its switch on invites accidents.
•
Do not tamper with or disable safety systems.
•
Only use manufacturer-recommended attachments.
•
Before using, always visually inspect to see that the tools are not worn out or damaged.
Replace worn out or damaged elements and bolts in set to preserve balance.
•
Keep the machine in good operating condition. Operating the machine in poor or questionable
condition could result in serious injury.
•
Be sure all safety devices are in working order and warning labels are in place. These items are
installed for your safety.
!
