15
NOTE
It is necessary as part of routine maintenance to adjust the drive cable tension to
ensure the lawnmower will self-propel correctly.
3.29
If there is more than 10mm play in the drive lever before the cable begins to move,
then the drive cable will require adjustment.
3.30
Trace the drive cable down towards the lawnmower until you reach the drive cable
adjuster.
3.31
Undo the lock nut and wind it forwards.
3.32
Wind the adjuster nut towards the main handlebar.
As you adjust, keep checking the tension on the drive cable until the desired tension
has been reached.
3.33
Tighten the lock nut finger tight back towards the adjuster nut and check for drive
on the lawnmower.
Once drive has been restored, tighten the lock nut securely.
DRIVE CABLE ADJUSTMENT
