28
Using The Lawnmower
Adjusting The Cutting Height
The cutting height can be adjusted from MIN.
(2.5cm) to MAX. (5.5cm). If the grass is long it
is appropriate to let the mower start mowing
at the MAX. cutting height. Once the grass is
shorter, you can gradually lower the cutting
height by 1cm every few days.
To Adjust The Cutting Height
STEP 1
Press the STOP button to stop the mower.
STEP 2
Lift the front cover, and rotate knob to adjust
the cutting height.
STEP 3
Rotate knob clockwise to increase the cutting
height.
STEP 4
Rotate knob counter-clockwise to reduce the
cutting height.
Control Panel
• Use the control panel for all commands and
settings. All functions are accessed via a
number of menus.
• The control panel consists of a display and a
keypad. All information is shown on the
display and all input is done on the keypad.
• The main menu is the uppermost level of the
menu structure.
• The cursor shows which menu has been
selected when the MENU/OK button is
pressed.
• The clock shows the current time.
• The text AUTO or MAN shows which
operating mode has been selected.
• The battery status shows the remaining
battery power.
• The keypad consists of three groups of
buttons: selection, numbers and power switch.
STEP 5
Close the front cover.
Summary of Contents for HYRM1000
