Draining / Filling Transmission Oil
1.
To allow easier access to the oil drain/refill plug
(X)
, you can remove the tine
blades
(E)
as shown in the ‘Replacing Tine Blades’ section. The oil drain/refill plug
(X)
is on the right side of the machine (if you are standing in front of the machine).
2.
Lay the machine on its right side so the plug is facing down towards the ground.
3.
Before removing the oil drain/refill plug
(X)
, you must clean the transmission and
remove any dirt or debris.
4.
To unscrew the oil drain/refill plug
(X)
, use a 8mm hex key
(not included)
.
5.
Drain the oil from the transmission into a suitable container. You must dispose of
the oil correctly.
Maintenance & Care
www.hyundaipowerproducts.co.uk
34
X
X
Continued on next page
E