Maintenance & Care
13
STEP 1
Stop the cleaner. Disconnect the mains plug
from the power supply.
Maintenance & Care
STEP 2
Remove hose from the drum.
STEP 3
Clean hose, drum connection and nozzle
using a damp cloth to clean the plastic parts.
STEP 4
Brush dust off air filter and, if necessary,
wash it in warm soapy water. Do not use any
cleaning products, solvents or sharp objects
for this purpose. Make sure it is completely
dry before refitting.
Only use accessories and spare parts
recommended by the manufacturer. You must
only have it repaired by an authorised
electrician.
Repairs
IMPORTANT -
Routine and accurate
maintenance is essential for maintaining
original machine safety and performance
levels.
!
WARNING -
Before cleaning or doing
maintenance work, you need to switch the
machine off and disconnected from the mains
power supply.
If there are worn or damaged parts,
never use the machine. Faulty or worn-out
parts must be replaced and not repaired. You
must only use original spare parts. The use of
non-original and/or incorrectly fitted parts will
jeopardize the safety of the machine. This may
also cause accidents or personal injuries for
which the manufacturer is under no
circumstance liable or responsible.
Any maintenance operations or
adjustments not explained in this manual must
be carried out by your Dealer or a specialised
Service Centre with the necessary knowledge
and equipment to ensure that the work is done
correctly maintaining the machine’s original
safety level. Any operations performed in
unauthorised centres or by unqualified
persons will invalidate the Warranty and all
obligations and responsibilities of the
Manufacturer.
!
!
!
Part
Part Number
Filter
HYVI2012FILTER
Hose
HYVI2012HOSE
Nozzle
HYVI2012NOZZLE
Only use original spare parts: The use of
non-original and/or incorrectly fitted parts will
jeopardize the safety of the machine, may
cause accidents or personal injuries for which
the Manufacturer is under no circumstance
liable or responsible.
Spare Parts
