background image

ADDITIONAL INFORMA

TION

OPERATIONS

How to use buttons & adjustment on the unit

Communicating Function

Turn power switch ON. Use the slide switch for volume and brightness controls.

1. Visitor presses the “Call” button on the outside camera unit.

The monitor’s speaker will sound a “chime” tone to announce that a visitor is at
the door.

2. Upon viewing the monitor’s CRT screen and the visitor’s image, you have two choice ;

A. You can choose to “not respond” (by not lifting the handset) The visitor’s

image will disappear from the monitor’s CRT screen within 30 seconds

B. You can choose to “respond” by lifting the handset and talking to the visitor as if

using a telephone. The visitor’s image will remain on the CRT screen for 180
seconds, or until the handset is replaced back into the cradle.

3. After speaking with the visitor, and if you have installed an electronic door locking

system, you can push the “Open” button(        ) to electronically unlock the door.

4. Press the call button(        ) to call the additional monitor as an intercom.

BUTTON

DESCRIPTION

Monitor

ON/OFF of screen, talk through door camera

Intercom

Activate an talk with the intercom

Door Door 

release

Time

Time Adjustment (Enter or Move: Use Time button, 

:Use Record

button,   

:Use Review button)

Rec

Record manually. Automatic recording in case of the “Absence”

mode

Review

Review recorded pictures

Away

Set or Reset “Absence” mode or quit the review

ADJUSTMENT

DESCRIPTION

Brightness adjustment. (In the hook) After pick up the handset,

user can adjust the brightness of screen (Mode: Normal/ Brighter)

Volume adjustment. (In on hook) After placing the handset, user

can adjust the volume of sound (Mode: Normal/ Louder)

Summary of Contents for HA-200













Reviews: