ADJUSTING THE LOAD FORKS
5-26
The load forks are adjustable on the hanger, carriage. Forks
should be spaced as far apart as the load will allow. Both forks
should always be the same distance from the center of the fork
carriage. To adjust the forks, raise the carriage slightly. Tilt the mast
fully forward to reduce friction and make the fork slide easier.
Unlock the fork locking pins.
Position the forks by pushing them away from you. Secure the fork
locking pins.
2)
160D7OM134
LOAD ON FORKS
Do not elevate the load with one fork.
Loading with one fork cause the tip over, serious injury or death of
operator.
The work can cause the height difference between both fork tips.
(1)
3)
110D9OM137
Do not elevate the load with the ends of the forks.
This work can cause the height difference tips due to overload in
the end of the forks.
The load should be loaded at least over 2/3 of fork length.
(2)
110D9OM138
