5-33
15. TRANSPORT
PRECAUTIONS FOR LOADING AND UNLOADING
Contact your HYUNDAI forklift distributor for advice regarding transportation of the truck.
When loading or unloading the truck on or from a transporter, using loading ramp, the following
precautions must always be observed.
Check travel route for overpass clearance.
Make sure there is adequate clearance if the lift truck being transported is equipped with a
high mast or cab.
Remove ice, snow or other slippy material from the shipping lift truck and the loading dock.
Ensure that the transporter cannot move by applying the brake and putting blocks under the
wheels. Put the gear selector lever in the NEUTRAL position.
Fix the loading ramps securely so that the
centers of the transporter and truck are aligned.
(The loading ramps should be of sufficient width,
length and thickness to permit safe loading or
unloading.)
After checking that the truck is aligned with the
loading ramps, back the truck slowly up the
ramps to load it on the transporter.
When on the loading ramps, never change
direction. If it is necessary to change
direction, drive off the ramp and realign the
truck.
Block the wheels and secure the lift truck with
tiedowns.
1)
(1)
(2)
(3)
110D9OM34
D255OM33
