3-16
Main screen
You can select or set the menu by the button of the cluster.
Please refer to the page 3-15 for the selection and change of the menu and input value.
Camera screen
Depending on the gear, if the gear is rear position, screen is changed to camera screen.
If the camera is not mounted or the camera signal is abnormal, the current screen remains.
Occurrence of the truck fault
While illuminates the engine, transmission or air conditioner warning lamp, when you press
right button (
▶
) in the cluster button for about 4 seconds, it directly connected to the current failure
screen.
(Warning lamp : Engine ( ), Transmission ( ) and Air conditioner ( ).
(1)
※
※
(2)
LCD
5)
180D9CD10
180D9CD13
50D9CD11
300D9CD12
Main menu screen
Main screen
Communication error
Sub menu screen
MENU
Main screen when occurred communication error between the
cluster and TCU/ MCU / ECU
※
1 Engine rpm
2 Load indicator (opt)
3 Hour meter
4 Odometer
5 Current time
6 DEF level gauge
7 Rear wheel angle (opt)
8 Mast angle (opt)
9 Vehicle angle X (opt)
10 Vehicle angle Y (opt)
11 T/M info (error code, gear, warning)
12 Temperature (outdoor temp., setting temp) (cabin opt)
13 Warning and pilot lamps
1
6
2
8
3
9
4
10
5
7
11
13
12
①
②
