6-26
Insert preassembled pressure plate with
same way for 2nd section.
(4)
22B7HS53
Locate driving and driven gears at right
position and pressure plate and mounting
flange also.
(5)
22B7HS54
Tighten the bolts with washer in a
crisscross pattern.
Â
Tightening torque : 4.59kgf
Â
m(33.2lbf
Â
ft)
(6)
22B7HS55
Check that the pump rotate freely when
the drive shaft is turned by hand. If not a
pressure plate seal may be pinched.
(7)
22B7HS56