7-59
Code
Alarm string
Description
Condition that has to occur
to come out from
alarm status
240
243
254
252
248
242
242
244
MOTOR
STALL
SEQUENCE
FAULT
CANBUS KO
DISP.
CHAT MODE
DISPLAY
ENABLE
PUMP
WARNING
MOTOR
STALL
SLAVE
WARNING
X
X
X
X
X
X
X
X
Warning: The encoder
signal is constantly
zero when the maxi-
mum torque is applied
to the motor
Warning: An incorrect
start sequence has
been detected on the
seat, pedal and levers
commands
Alarm: Master has lost
can communication
with the display
Warning: The chat
time has expired
Warning: The display
enable signal has not
been received to
operate the truck
Warning: A warning is
active on the pump
module
Warning: The encoder
signal is constantly
zero or opposite to
applied frequency
when the maximum
torque is applied to
the motor
Warning: A warning is
active on the pump
module
To recycle the key
To remove warning cause
To activate traction or
pump request
To remove warning cause
To remove warning cause
To recycle the key
To remove warning cause
Traction
Pump
