10
Risk of Explosion or Fire
1.
Make sure the air compressor is in a well-ventilated area, free
of any combustible or flammable materials, gasoline, or solvent
vapours.
2.
Make sure to keep the compressor at least 20 feet away when
spraying flammable materials.
3.
Keep all flammable materials in a secure location away from the
air compressor.
4.
Do not restrict any of the compressor’s ventilation openings.
This may cause overheating and could cause a fire.
5.
Make sure to operate the compressor in an open area at least
three feet away from any wall or obstruction that could restrict
the airflow of the compressor.
Risk of Bursting
1.
Make sure to drain the tank after each use. If the tank develops a
leak, replace it immediately with a new tank or new compressor
outfit.
2.
Do not attempt to modify or repair the tank. Any drilling,
welding, or other forms of modification may result in serious
injury to you and/or others.
3.
Do not adjust regulator to result in output higher than marked
maximum pressure of attachment.
Risk of Electrical Shock
1.
Do not operate in wet environments.
2.
Do not expose the compressor to rain.
3.
Make sure the compressor is properly grounded. Failure to
ground the unit may increase the risk of electrical shock.
4.
All electrical work must be performed by a qualified or licensed/
certified electrician.
Summary of Contents for AirPower
