Hyundai ATS12-3P, User Manual

2

ATS system is designed for mains power supply off and starts generator for emergency 
power supply on.
When mains power supply off,the generator will star in 2-6 seconds,and then supply power 
to load.When mains power supply on,the ATS system will automatically transfer switch to 
main power supply,and then stop the generator in 2-6 seconds.

Use the cable to connect the ATS box to the generator control panel, and switch "AUTO" 
position.

This system use SCM core and digital technics to control and manager automatic 
working system.
Easy installation and operation
Automatic working without people inspection.When transfer broken the system will 
remain error record,and indicate engineer to inspect and re-setup.Don’t worry 
about mains power supply and generator power supply action same time.
There is a battery charger inside,and charge the battery of generator automatically.

Place the switch in the AUTO position, ATS system works automatically.

USER MANUAL ATS BOX

1. PRODUCT INSTRUCTIONS

2. OPERATION STEPS

When generator can not start successfully in 3 times, System fault alarm.

NOTICE:

1
2
3
4
5
6

1.1

1.2
1.3

1.4

2.1 Automatic position setup

When the ATS system works automatically, if mains power supply off,ATS system 
will automatically start the generator in 2 seconds,and wait the generator run 5-6 
seconds, system will switch load to generator power supply.

2.2 ATS system working

When generator can not start well,ATS system will start generator circularly 3 times 
as below:
 

Mains power supply off

Generator start 5 seconds first time

Start unsuccessfully and wait 5 seconds

Generator start 5 seconds second time

Start unsuccessfully and wait 5 seconds

Generator start 5 seconds third time

2.3 ATS system start 3 times

EN