2
3
Instruction manual
Instruction manual
Radio operation
• Set FUNCTION switch to RADIO position.
• Select your desired broadcasting band
with AM/FM button.
• Rotate TUNING knob to receive the
desired station.
• Adjust the level of sound with VOLUME
knob.
• To turn off the radio, set FUNCTION
switch to TAPE position.
Antenna
• For FM reception, adjust the telescopic
antenna appropriately to obtain the best
reception on the band selected.
• The AM signal is picked up through the
built-in antenna. The set should be placed to a
position for the best reception.
Headphone jack
• For private listening, insert 3.5 mm
headphone into the stereo headphone jack.
• Adjust volume control to the appropriate
level as desired.
• When the stereo headphone jack is
plugged, speaker will disconnect automatically.
Compact disc operations
Playing discs
• Set FUNCTION switch to CD/USB
position.
• Open the CD door by pressing “OPEN/
CLOSE“ inscription on the CD compartment
cover. Put a CD into the CD compartment with
the label side upwards and close the CD door
by pressing “OPEN/CLOSE“ inscription on the
CD compartment cover.
Playing USB devices
• Set FUNCTION switch to CD/USB
Important safeguards
•
Attention:
The owner’s manual contains
important operating and maintenance
instructions. For your safety, it is necessary to
refer to the manual.
•
Dangerous voltage:
Uninsulated
dangerous voltage that may be of sufficient
magnitude to constitute a risk of electrical
shock to persons is present within this product
enclosure.
•
Caution:
To reduce the risk of electric
shock, do not dismantle the body. Prefer
servicing to qualified service personnel. Do not
use the unit in places where it can be exposed
to water, moisture and dust. Make sure that
pins or other foreign objects do not get inside
the unit; they may cause malfunctions, or
create safety hazards such as electrical shock.
Power supply
Battery operation
• Open the battery compartment cover.
• Insert 8 x UM-2/LR14 “C” size batteries.
Please observe correct battery polarities or the
set will not work.
• Close the battery compartment cover.
AC operation
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Plug the corresponding end of cord into
the AC socket on the rear of the set.
• Insert the plug into power supply.
Caution:
• When the set is only used with AC or is
not used for 2 weeks or more, please remove
the batteries, to avoid damage to the set from
leakage of batteries.
• Always switch off the unit when not in use.
• Always unplug the appliance from power
supply, when no use long time.
Summary of Contents for H-1425
Page 14: ......
