Hyundai H-CCR8100, Instruction Manual

Operation

14

RETUNE S/L - SHORT/LONG
“RETUNE” refers to the time period 

the unit allows for radio scan when 
reception is interrupted. “S” represents 
a long time period, and “L” represents 
a short time period.

USB/SD/MMC operations

Connecting a USB-device/

Memory card

Insert a USB device into the USB 

port of this unit. Or detach the front 
panel and insert an SD/MMC memory 
card until a click into the memory card 
slot. To remove the card, press it until 
a click, then pull to remove.

  USB/SD/MMC supported 

capacity: up to 16 Gb.

For correct and satisfactory 

operation, licensed SD/MMC memory 
cards of famous brands should 
be used with this unit. Avoid using 
memory cards of unknown brands. 
Some models of USB devices cannot 
be supported by this unit due to 
incompatibility.

According to the USB 1.1/2.0 

Standard, usage of a USB device with 
power current consumption exceeding 
500 mA is not recommended without 
supplementary power supply. Failure 
to use supplementary power for 
connected USB drives with power 
consumption exceeding this value 
as well as defective USB drives may 
cause mechanical or thermal changes 
of elements of the unit as well as failure 
of internal elements of USB port. Such 
damages are not warrantee cases.

  Usage of external USB drives 

containing BIN files in the root 
directory may cause malfunction of 
the unit or damage to the software.

Playback

When a USB or a memory card is 

first connected, playback will begin 
automatically.

Depending on the number of files 

and folders, the device may take 
several seconds to begin playback. If 
no supported audio files are detected, 
“USB” or “SD” will be displayed.

Track select

•  Press 

 button to skip to the 

beginning of the next track. Press 

button to skips to the previous track.

•  Press F/PS button on the panel or 

APS button on the RC; track number 
will blink on the display. Rotate 
VOLUME knob or press VOL+/VOL- 
buttons on the RC to select the track 
number. Press SELECT button on 
the panel or SEL button on the RC to 
confirm your selection.

Folder select

Press 5/ - button to select the 

previous folder. Press 6/ + button to 
select the next folder.

Fast forward/rewind

Press and hold 

 or 

 button 

to rewind or fast forward the current 
track.

Pause

Press 1/

 button to temporarily 

stop file playback. Press it again to 
resume playback.

Intro playback