10
Operation
• Sound System: select corresponding
sound system.
• Colour System: select corresponding
colour system.
• Program Label: this item allows you to
name a channel, or rename the program
that you named also. In this item, you could
move white cursor by / buttons, and input
available character by / buttons.
If you wish to delete the character, you
have to press
/
buttons until the
current cursor disappears.
• AFT: this item allows you to fine tune
a channel selected due to weak or wrong
antenna configuration, some of the channels
may not be turned to the best reception. Select
AFT (Auto Fine Tune) On/Off.
• Manual Search: this item allows you to
select preset channel’s frequency one by one
with / buttons.
•
Program Edit
: this item allows you to sort
TV programs according to your preferences.
Enter into program edit menu:
A mark displayed on item, means it is
playing current channel’s program.
• Skip
Press
/
buttons to move cursor to
selected program channel. And press YELLOW
button,
X
mark will display on the current item, it
means the current program will be skipped and
could not be searched. Press YELLOW button
again, the mark
X
will disappear, it means you
cancel skip program selection.
• Lock
Press
/
buttons to move cursor
to selected program channel, And press CYAN
button, mark will display on the current item,
it means the current program will be locked
and could not be watched. Press CYAN button
again, the mark will disappear, it means you
cancel lock program selection.
• Move
This function allows you to change the
program of channels in the list:
Press
/
buttons to move cursor
to selected current program channel 1. And
press button to confirm.
Then press
/
buttons to move
cursor to target program channel 2. And press
button to confirm.
PC Position
(only in VGA mode)
PC POSITION
Auto Sync
Phase
Clock
Н Position
V Position
Position reset
Select
Adjust
•
Auto sync
: automatical setting of the
parameters.
•
Phase
: adjust the phase manually.
•
Clock
: adjust the image frequency
manually.
•
H Position/V Position
: adjust horizontal
and vertical position of the image.
•
Position reset
: reset the parameters to
initial factory settings.
