Hyundai H-LED22V13, Instruction Manual

4

Before you start

in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity.

•  Do not place any vase, potted plant, cup, 

medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown.

•  Do not install it at the place on the strong 

magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.

•  Fasten the wheel of the product or shelf 

with wheels when installing this product. If it 
moves or is tipped over, it may be damaged.

•  Do not place any fire source such as 

candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire.

•  Do not place the unit into closed space 

of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at least 10 cm 
at above, left, and right of the TV.

•  Please place all the signal cords behind of 

rear panel.

•  Do not overexert or touch the panel when 

you convey the product. Do not transfer the 
LED TV up or down display direction.

•  Do not transport it with the power cord 

or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, damaged power 
cord, connection cable or connection terminal 
may cause fire, electric shock or breakdown.

•  2 persons or more shall transport the 

device, which is heavier than 18 kg. If you drop 
or tip over the device, it may damage it.

•  The temperature of the product’s body 

becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.

All images provided herein are schematic 

drawings of real objects and may differ 
from their real images.

Installation

Base instalation

Cover an even stable surface with a soft 

cloth. Place the TV unit facedown on the cloth. 
Aline the holes in the stand with the fixing 
holes in the bottom of the TV casing. Fasten 
the 5 screws.

Wall mounting

•  Unscrew the 8 screws from the stand in 

the bottom of the unit. Separate the stand from 
the cabinet before wall mounting.

•  For wall mounting the back panel of this 

unit is equipped with 4 screw holes (for 4*8 
screws, 100 mm horizontal spread distance 
x 100 mm vertical spread distance). A 
wall-mount bracket should be used for wall 
mounting (the bracket is not included and 
should be acquired separately). Manufacturer 
is not responsible for improper mounting 
resulting in damage of the unit.