Hyundai H-MS1100, Instruction Manual

- 2 -

Laser Product

This product is equipped with low power laser equip-
ment inside, for using safely, don’t take apart any cov-
ers or try to take apart the product inside. Please con-
tact the qualified personnel for repairing.

This symbol indicates that there are important op-
erating and maintenance instructions in the litera-
ture accompanying this unit.

This symbol indicates that dangerous voltage con-
stituting a risk of electric shock is present within
this unit.

Caution:

To prevent fire or shock hazard, do not expose this
equipment to rain or moisture place.

Power Requirement

Because the power requirement of the electric prod-
ucts is different in various places, before you use this
product, make sure that the power requirement of the
product is complied to the power that the native dis-
trict supplies.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

Before Connection

Thank you for purchasing this DVD 5.1 channel component system, in order to fully utilize this system,
please read this instruction book carefully before use it.

For your safety

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Precautions

1. Before operating this system, check the voltage of

this system to see if it is identical with the voltage
of your local power supply.

2. Unplug the system from the wall outlet if it is not

used for a long time. To disconnect the cord, pull it
out by grasping the plug

3. To avoid electric shock, do not open the cabinet by

unqualified personnel

4. There is no user serviceable parts inside. In case

of system failure, unplug the power cord and
consult your dealer

5. Do not place this unit to an unstable and slope

position. Keep this unit in a place with good
ventilation surrounding. To prevent fire, do not cover
the ventilation of the apparatus with news papers,
table-cloths, curtains, etc.

6. To prevent fire or shock hazard, do not place

objects filled with liquids, such as vases, on the
apparatus. And don’t place lighted candles on the
apparatus.

7. To prevent fire or shock hazard, do not expose this

equipment to hot places, rain, moisture or dust.

8. Don’t get close to the water source when using this

unit, such as near bathtub, bath slot, ish-washing
slot, washing machine to use it; also, don’t use this
unit on damp plinth or nearby swimming pool or
similar close to the water source.

9. Do not place this unit close to strong magnetic field.
10. Don’t place this unit close to the damper, or the

moisture will affect the life of the laser head.

11. If the system is brought directly from a cold to a

warm location, or is placed in a very damp room,
moisture may condense on the lens inside the
player. Should this occur, the system will not
operate properly. Remove the disc and leave the
system turned on for about an hour until the
moisture evaporates.

12. Should any solid object or liquid fall into the system,

unplug the system and have it checked by qualified
personnel before operating it any further.

13. Before cleaning this unit, unplug the system from

the wall outlet first. Don’t use the cleaner which is
with liquid or aerosol (e.g. pesticide). You can use
a clean cloth to clean this unit.

14. Please use the connection cable to connect to unit.

Don’t use accessorial equipment recommended by
non manufacturer. It may course an electric shock
by using this equipment.

CLASS 1

LASER PRODUCT

Caution:

This product is equipped with low power la-

ser equipment inside, for your safety, don’t

open the laser radiation protective

equipment. Don’t look at the laser radiation

district when the equipment is operating.