Hyundai H-MS1105, Instruction Manual

H-MS1105 (

www.hyundai-electronics.ru

)

20

Press FUNCTION button on the unit or TUNER button on the RC to select FM function.
Press  FAST  FORWARD  button  repeatedly  to  move  from  frequency  to  frequency  until  the  next  station  is
found. Press and hold FAST FORWARD button for one second or more, the frequency will change up
automatically until a right station is found.
You also can operate the tuning forward key (TU+) on the unit.
Press FAST REWIND button repeatedly to move from frequency to frequency until the next station is
found. Press and hold FAST REWIND button, the frequency will change down automatically until a right
station is found. You also can operate the tuning backward key (TU-) on the unit.
You can store well tuned station by pressing PROGRAM button on the RC. (You can preset up to 16 FM
stations.) Tune in the desired station, then press PROGRAM button.
Press CH- button or CH+ button on the unit or NEXT/PREVIOUS buttons on the RC repeatedly to select
the preset number.

Note

: If the system is unplugged or if a power failure occurs, the preset stations will remain stored in the

memory.

Press NEXT button repeatedly to select preset number after presetting station. Its band and frequency are
displayed on the display.
Press PREVIOUS button on the RC repeatedly to select preset number before presetting station. Its band
and frequency are displayed on the display.
Press MODE button to select the Stereo or Mono channel to receive the FM radio mode, it can get the best
effect.

RDS (Radio Data System) Reception

Many FM stations are broadcasting added data compatible with RDS. This radio set offers convenient
functions using such data.

PS (Program Service Name)

When an RDS station is received, the RDS indicator lights and automatically displays the name of that
station instead of the frequency. When OSD/RDS button on the RC is pressed during PS display, the CT is
displayed for 3 seconds, then PS display returns.
PTY (Program Type)
Program type identification signal. (Example: News, Rock, Classical music.)

CT (Clock Time System)

The CT system may not properly operate in areas where RDS CT service is not available. Once CT service
is received, the CT system keeps operating. “RDS CLOCK” is displayed in areas where no CT services are
available.

Changing Display

During PS display, press OSD/RDS button on the RC repeatedly to select CT, PTY or Frequency. They
will be displayed for 3 seconds, then the PS display returns.

Clock/Timer Functions

Setting the Clock

The built-in clock shows the correct time in the display.

In standby mode, press CLOCK button, the hour indicator will blink.
Set the hour with the VOL+/VOL- buttons.
Press CLOCK button, the minute indicator will blink.
Set the minute with the VOL+/VOL- buttons.
Press CLOCK button, the built-in clock starts operating and the seconds start counting from 0.

Notes:

The operating time of every step shouldn’t be longer than 10 seconds or it will return to the original
display.