5
Connection
Video system connection
Before you start connection of external devices, ensure that power of the unit is switched off.
TV/monitor video input
Unit video output
Following video outputs are available in this unit.
Component video
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding
inputs of a TV/monitor.
Composite video
Use the cable with yellow plug of an AV cable to connect the composite video output of this unit
to the video input of a TV/monitor.
SCART
Use a 21-pin SCART cable to connect the SCART output of this unit to the TV/monitor SCART
input.
The connection you should make depends on the TV/monitor input terminals. Don’t make all
the connections at the same time; otherwise the produced picture will be affected.
HDMI
HDMI can transmit both audio and video signals over a single cable. HDMI output presents the
highest possible resolutions and video quality. If an HDMI input is present on your television, use it.
Use a HDMI cable to connect the HDMI output of this unit to the HDMI input of a TV/monitor.
composite video input
composite video output
HDMI input
HDMI output
SCART input
SCART output
Y
C b/Pb
C r/P r
Y
Cb/P b Cr/P r
YPbPr input
YPbPr output
