Hyundai H-MS2302, Instruction Manual

- 11 -

stored in successive (program) positions.
After a maximum of 64 or less tracks have been selected as described above, press
CLOCK/PROGRAM button on the unit or PROGRAM button on the RC, the display will now show
MEMORY to indicate you have saved a program-memory.
Press PLAY/PAUSE button, the unit will playback the saved files in the programmed sequence.
To clear (cancel) the entire program, which is stored in the memory, simply press STOP button, this
will reset the memory and clear the program.

File name display (for MP3 discs)

At anytime during playback, press and hold FIND/DISPLAY button on the unit or FIND/M/S button on
the RC for 1 second. The display will show the file name (track name) information.

Text display mode (id3 display)

This unit is capable of displaying the text information (id3 tag) of an MP3 track on the display. To switch
on this function, simply press and hold FIND/DISPLAY button on the unit or FIND/M/S button on the
RC for 3 seconds. To switch back to normal display mode (to display track number, etc.), press and hold
FIND/DISPLAY button on the unit or FIND/M/S button on the RC again for 3 seconds.

Finding MP3 tracks by track name (for MP3 discs)

In stop or play modes, press FIND/DISPLAY button on the unit or FIND/M/S button on the RC
once.
The FIND symbol will flash in the display, and the letter “A” will be shown. This is the “search
letter”.
Press NEXT or BACK buttons on the unit or BACK/TUNE DOWN or NEXT/TUNE UP buttons on
the RC to select the desired search letter. (                                  )
At every selected search letter the lower part of the display will show the name of the first track
beginning with that selected letter on the disc.
With any selected letter, there might be several tracks on the disc (which begin with the same
alphabet). To search for all tracks beginning with a particular letter, press and hold for 2 seconds
NEXT or BACK buttons on the unit or BACK/TUNE DOWN or NEXT/TUNE UP buttons on the
RC until the FIND symbol stops flashing on the display.
When the FIND symbol stops flashing press NEXT button on the unit or NEXT/TUNE UP button on
the RC to display the next track starting with same letter. Repeat until desired track is found.
At any time, when you have found a desired track just press PLAY/PAUSE button to listen to it.
To  exit  the  search  mode,  press  FIND/DISPLAY  button  on  the  unit  or  FIND/M/S  button  on  the  RC
twice until the FIND symbol disappears from the display.

Finding MP3 tracks by folder (for MP3 discs, USB and SD-cards)

To search for a track within a particular album, press FIND/DISPLAY button on the unit or
FIND/M/S button on the RC twice.
The FOLDER symbol will show on the display together with the folder name.
Press NEXT or BACK buttons on the unit or BACK/TUNE DOWN or NEXT/TUNE UP buttons on
the RC to select any folder by the folder name.
When the desired folder name appears on the display, press and hold for 2 seconds NEXT button on
the unit or NEXT/TUNE UP button on the RC until the FOLDER symbol disappears. This will open
the selected folder and allows you to display all the tracks contained in this folder.
You can select the desired track by pressing NEXT button on the unit or NEXT/TUNE UP button on
the RC and play it by pressing PLAY/PAUSE button.

Repeat playback function

During playback press REPEAT button repeatedly to select:

“ACTIVE 1” - to repeat the current track.
“ACTIVE ALL” - to repeat all track (full CD).
“ACTIVE ALBUM” - to repeat all tracks from currently selected album (folder).