Hyundai H-MS2302, Instruction Manual

- 8 -

Installation of batteries

In the remote control

1.  Remove the battery compartment cover.
2.  Insert two batteries (size AAA) correctly, so that the + and - polarities match the polarity diagrams in

the battery compartment.

Note:

When the batteries are exhausted, the remote control can no longer operate the system. Replace

both batteries with new ones.

In the unit

1.  Remove the battery compartment cover.
2.  Insert two batteries (size AA) into the compartment correctly, so that the + and - polarities match the

polarity diagrams in the battery compartment to save all the options when you plug the unit off.

Notes:

Don’t use an old battery with a new one.
Don’t use different types of batteries together.
When the unit is not used for a long period of time, remove the batteries to avoid damage caused by
battery leakage and corrosion.

Connection

Connection of speaker boxes

Unwrap the speaker-cords of both speaker-boxes.
Please notice that each speaker cord consists of two wires, one is “clear”, the other has a black line.
Insert the “clear” wire of the left speaker-box into the red (+) speaker connector on the back of the
main unit, which has the “L” indication (under the speaker-connector).
Insert the black wire of the left speaker-box into the black (-) speaker connector on the back of the
main unit, which has the “L” indication (under the speaker-connector).
Repeat the above two steps for the right speaker box, but this time, inserting them into the red and
black connectors with the “R” indication.
When inserting each wire into a connector, press downwards on the connector's plastic knob (red or
black part) and push the exposed metal end of the wire all the way into the hole above this knob.
Place the speaker boxes as far apart as possible for best sound effect.

Power supply connections

This set works on normal household AC-power.
Make sure the set voltage of the unit matches your local voltage.
Insert the plug of the AC-cord into a wall outlet with AC-power.
Press the POWER/ON/OFF button to switch on the unit.

Note:

When the power is on the entire digital display will be lit up with a blue backlight. This

indicates the HI-FI is switched on.
1.   This  unit  is  designed  to  operate  without  ever  being  totally  powered  off.  It  will  either  be  on  or  in

standby mode.

2.  In standby mode, the blue backlight of the digital display will be switched off but the display will

show the current time (clock function).

3.   When  in  standby  mode,  you  can  use  the  power  switch  (on  remote  control  or  on  front  panel  of  the

main unit) to switch on the unit.

4.  To save electricity, please switch the unit to standby mode when not listening to radio or CD music.