- 15 -
General operations
Power ON/OFF
Press ON/STANDBY button to switch on the unit. Press this button to switch the unit off.
Digital clock function
The set has a built-in digital clock, which is displayed when the unit is in standby mode or when you
press and hold PROG/CLOCK ADJ button for 2 seconds during CD or radio operation.
To set the correct time, follow this procedure:
Switch unit to standby mode (display light is off).
Press and hold PROG/CLOCK ADJ button for 3 seconds. Display shows 12 hour or 24 hour
(flashing).
Press NEXT or BACK buttons to select 12 hour or 24 hour clock display mode and press
PROG/CLOCK ADJ button to confirm your selection.
Press NEXT or BACK buttons repeatedly to set the correct hour in the display and press
PROG/CLOCK ADJ button to confirm.
Press NEXT or BACK buttons repeatedly to set the correct minute in the display and press
PROG/CLOCK ADJ button to confirm.
Correct time is now set and will be shown in the display.
Automatic power On/Off timer function
This set has a timer function to enable you to program the unit to automatically switch on or off at
preset times. This is useful as a morning alarm clock.
To set timer follow the procedure:
Press and hold TIMER button. The ON TIME symbol appears in the display.
Press NEXT or BACK buttons to adjust the hour of the desired power on time and then press TIMER
button to confirm.
Press NEXT or BACK buttons to adjust the minutes of the desired power on time and then press
TIMER button to confirm.
Now the symbol in the display changes to show OFF TIME.
Press NEXT or BACK buttons to adjust the hour of the desired power off time and then press
TIMER button to confirm.
Press NEXT or BACK buttons to adjust the minutes of the desired power off time and then press
TIMER button to confirm.
Now the display will indicate the wake up mode (CD/radio/USB/SD). Press NEXT button to choose
the desired mode and press TIMER button to confirm.
The display then shows the wake up volume level (loudness).
Press NEXT or BACK buttons on the unit to increase or decrease the volume level to be used for the
music to be played when the timer switches on the unit at the pre-set time.
Press TIMER button to confirm.
Finally the unit will return to the normal display, except that the symbol TIMER will be shown, to
indicate that you have programmed a power ON/OFF alarm setting.
In case you wish to disable the timer, press TIMER button and the TIMER symbol disappears.
Note:
The automatic power ON/OFF timer will switch on the unit as if you have manually pressed
ON/STANDBY button. If you have selected “wake to radio”, the exact preset radio band and station
will become activated when power switches on.
Wake up to CD
If you have selected the “wake to cd” mode, the unit will switch on at the preset time and start playing
the disc, which was last played. Therefore, if you wish to wake up to a particular cd (eg. disc 3) you
should press that cd select (i.e. CD3) button before powering off the unit at night. Also, make sure the
“timer” symbol is indicated in the display.
Summary of Contents for H-MS2303
