- 16 -
Automatic power off (sleep) function
This unit has a special sleep timer function, which can automatically switch off the unit. This is useful
for sleeping to music at night.
At any time while the unit is operating (CD or radio modes), press SLEEP button repeatedly to choose
the automatic power off time.
(*00 means sleep timer is deactivated)
Equalizer
Press EQ button repeatedly to choose the desired sound effect according to the music you are listening
to:
Note:
Certain equalizer settings are not suitable for some specific genres/types of music and may
cause distortion, especially at high volume levels. In such cases, please change the equalizer to a
different setting or switch to “EQ OFF” mode.
Volume control
To increase or decrease the sound volume level of the unit, press and hold VOLUME UP or
VOLUME DOWN buttons respectively. Release the button when volume is at the desired level.
Notes:
Sometimes, especially during listening to the radio, you may notice a clicking sound while
adjusting the volume. This is a normal phenomenon; the sound will disappear when you release the
volume buttons.
Self Cleaning System
To prevent major particles of dust accumulation on the CD mechanism, the motorized deck has special
vibration motion to avoid such accumulation. This severs to keep the CD mechanism clean, without the
need of additional external cleaning devices, under normal circumstances.
Anti-skip (antishock) function (ESP)
This unit has a built-in digital anti-skip function, which prevents CD skipping when the unit is
physically moved or subjected to vibrations for up to 20 seconds when playing MP3 discs.
Whenever any MP3 disc is played, during the first 15 (approx.) seconds the anti-skip memory is
being filled up (but is not yet full). The anti-shock protection is already active (in use) at this time, but
not yet to the maximum 20 seconds capacity.
Once the anti-shock memory is full, the unit provides anti-skip protection for 20 seconds of vibration.
Please note that the anti-skip function only protects against normal vibration or minor movement.
Severe or strong shocks/vibrations to the unit may still cause skipping.
Using the audio line in connection (AUX input)
You can connect the audio output of an external device such as an MP3 player to this unit, to listen to
the sound of that device through the high quality amplifier of this music system.
To connect the external device, please use a standard RCA cable to connect the audio line out of the
device (left and right channels) to the AUX line RCA jacks (left and right) on the side panel of this
unit.
Press AUX button on the unit to switch on the AUX mode.
Make sure that the speakers are connected to the main unit.
Switch on the power of the main unit and the external device.
Start playback of the external device and adjust the volume control of the main unit to the desired
level.
Remember to switch off the power of the music system (main unit) when you are finished using the
external device.
Summary of Contents for H-MS2303
