Hyundai H-PS1203B, Instruction Manual

4

Instruction manual

Important safeguards

•  The instruction manual contains important 

operating and maintenance instructions. For 
your safety, it is necessary to refer the manual. 
Keep the manual for use in future.

•  Do not hit or drop the unit.
•  Do not expose the unit to vibration, 

direct sunlight, too high or low temperature 
or humidity.

•  Do not disassemble the unit yourself. 

Refer servicing to qualified service personnel.

•  When the battery is exhausted, it should 

be removed from the set to prevent leakage.

Power supply

Power source

This unit is operated by a 3.7 V, 1800 

mA/h rechargeable lithium-ion battery of 
18650 type (included) or by connecting the 
power input DC5V of this unit to a power 
source with the supplied MiniUSB cable.

Battery installation

Remove the battery compartment cover. 

Follow the polarity to install the supplied 
lithium-ion battery. Close the battery 
compartment cover.

  •  Be sure that the battery is installed 

correctly. 

•  If the unit is not to be used for an 

extended period of time, remove the battery 
to prevent damage or injury from possible 
battery leakage.

•  Do not dispose of the battery in fire, the 

battery may explode or leak.

•  The rechargable lithium-ion battery is 

a consumable and its malfunction is not a 
warranty case.

General operations

Power on/off

Press and hold  /  button to switch the 

unit on; the display will light up. To switch the 
unit off, press and hold this button again.

Headphone socket

For private listening please insert 

the earphones (not included) into the 
headphone jack (the speaker inside the radio 
disconnects automatically), now you can 
listen to the radio by earphones.

Clock

Press  /  button shortly. When clock is 

displayed, press and hold SET button, hour 
digits will blink. Press repeatedly 

/

buttons to set hours. Press SET button again; 
minute digits will blink. Press repeatedly 

/

 buttons to set minutes.

AUX input

You can connect the audio output of an 

external device to this unit, to listen to the 
sound of that device through the speakers of 
this unit.

•  To connect an external audio device, 

please use a standard audio cable with 
3.5-mm-to-3.5 mm plugs to connect the 
headphone out or audio line-out of the 
external device to the AUX input socket of 
this unit.

•  Press repeatedly M button to select AUX 

mode; AUX and LINE will be displayed.

•  Turn on the external device. You cannot