2-10
Safety system of your vehicle
Reinstall
To reinstall the head restraint:
1.Put the head restraint poles (2) into
the holes while pressing the
release button (1).
2.Recline the seatback (4) by pulling
up the seatback lever (3).
3.Adjust the head restraint to the
desired height.
Seat warmer (if equipped)
The seat warmer is equipped to
warm the front seats during cold
weather.
With the ignition switch in the ON
position, push either of the switches
to warm the driver's seat or the front
passenger's seat.
In the mild weather or under condi-
tions where the operation of the seat
warmer is unnecessary, keep the
switches in the "OFF" position.
Information
Even with the seat warmer switch in
the ON position, the seat warmer
automatically turns ON and OFF
depending on the seat temperature.
• Do not use an organic solvent
such as thinner, benzene, alco-
hol and gasoline to clean the
seat. Doing so may damage the
surface of the heater or seats.
• To prevent the seat warmer from
being overheated, do not place
anything on the seats that
blocks the thermal emission,
such as blankets, cushions or
seat covers, when the seat
warmer is in operation.
• Do not place heavy or sharp
objects on the seats equipped
with seat warmers. Damage to
the seat warming components
may occur.
• Do not change the seat cover. It
may damage the seat warmer or
the air ventilation system.
NOTICE
i
OEU034031
Always make sure the head
restraint is locked into position
after reinstalling or adjusting it.
WARNING
OEU034025
