3-21
Con
venient f
e
atur
es of y
our v
ehicle
2. Fold rods (1) into the housing in
the step.
Push the step into its housing
3. Insert R-clips (2) into the step as
far as they will go through the
holes on both sides of the hous-
ing.
The step is secured in its housing.
When securing the step for the
first time, you must pierce a film
with the spring cotters.
Regular cleaning
Steps should be cleaned at least
once per month and more often if
conditions dictate.
By using a power hose or even a
standard hose frequently ensure no
build up of material inside the step.
The step will “self-clean” if the mud
and dirt is lubricated with a power
wash.
Remember to clean not just the tread
(the bit you stand on) but the side of
the step too.
NOTICE
3
OEU044079
OEU044226
OEU044077
Electric step
side rail
Lower entrance
Upper entrance
