Do not use this type of machine for sweeping away debris.
Do not use the unit when you are tired, ill or under the influence of medication, drugs or
alcohol.
Use nylon cutting head which is free of damage. If a stone or any other obstacle is hit, stop
the engine and check the nylon cutting head. A broken or unbalanced nylon cutting head
must never be used.
Do not store in a closed area where fuel vapors can reach an open flame from hot water
heaters, furnaces, etc. Store in a locked, well-ventilated area only.
Ensure safe and proper performance of your product. These parts are available from your
dealer. The use of any other accessories or attachments may cause injuries to the user,
damage to the machine and void this warranty.
When refuelling, be sure to stop the engine and confirm that it is cooled down. Never refuel
when the engine is running or hot. When gasoline spills, be sure to wipe it up completely
dispose of those materials before starting the engine.
Stay clear of other workers or bystanders by at least 15 meters.
Whenever approaching an operator of the machine, carefully call his attention and confirm
that the operator stop the engine. Be careful not to startle or distract the operator which can
cause an unsafe situation.
Never touch the nylon cutting head or blade whenever the engine is running. If it is
necessary to replace the protector or cutting attachment, be sure to stop the engine and
confirm that the cutting device has stopped running.
The engine should be turned off when the machine is moved between work areas.
Be careful not to hit the nylon cutting head against stones, or the ground.
Unreasonable rough operation will shorten the life of the machine as well as create an
unsafe environment for yourself and those around you.
Pay attention to loosening and overheating of parts. If there is any abnormality of the
machine, stop operation immediately and check the machine carefully. If necessary, have
the machine serviced by an authorized dealer. Never continue to operate a machine which
may be malfunctioning.
In start-up or during operation of the engine, never touch hot parts such as the muffler, the
high voltage wire or the spark plug.
After the engine has stopped, the muffler is still hot. Never place the machine in any places
where there are flammable materials (dry grass, etc.), combustible gasses or combustible
liquids.
Pay special attention to operation in the rain or just after the rain as the ground may be
slippery.
If you slip or fall to the ground or into a hole, release the throttle lever immediately.
Be careful not to drop the machine or hit it against obstacles.
Before proceeding to adjust or repair the machine, be sure to stop the engine and detach
the spark plug.
When the machine is placed in storage for a long time, drain fuel from the fuel tank and
carburettor, clean the parts, move the machine to a safe place and confirm that the engine
is cooled down.
Make periodic inspections to assure safe and efficient operation. For a thorough inspection
of your machine, please contact a dealer.
Keep the machine away from fire or sparks.
Summary of Contents for HCOMBIBP50
Page 1: ...HCOMBIBP50 READ THE INSTRUCTIONS BEFORE USE THE TOOL ...
Page 37: ......
