23
5.3 - General Inspection
1. Look for fuel leaks around the fuel tank, fuel hose, fuel valve and
carburetor. Close the fuel valve and repair leaks immediately.
2. Look and listen for exhaust leaks while the engine is running. Have all
the leaks repaired before continuing operation.
3. Check for dirt and debris and clean as necessary
4. Check the engine oil level and add oil as necessary.
Do not use gasoline or low flash point solvents for cleaning. They are flammable
and could explode under certain conditions.
5.4 - Air Filter Service
Using gasoline or other flammable solvents can cause a fire or explosion. Do
not operate this product without an air filter.
1. Rotate the knob counterclockwise to release.
2. Lift the air cover to remove from the air filter unit.
3. Remove the foam element.
4. If the foam element is dirty, clean it in warm soapy water, rinse, and
allow it to dry thoroughly, or clean in non-flammable solvent and allow to
dry.
Summary of Contents for HCP9100
