2
1. 1.SAFETY WARNINGS
Proper safety precautions must be observed. Like all power equipment this unit must be handled
carefully. DO NOT EXPOSE YOURSELF OR OTHERS TO DANGER.
Follow these general rules. Do not permit others to use this machine unless they are thoroughly
responsible and have read, and understand the machine manual and are trained in its operation.
Always wear safety goggles for eye protection. Dress properly; do not wear loose clothing or
jewelry that could become caught in moving parts of the unit. Safe, sturdy, nonskid footwear
should always be worn. Long hair should be tied back. It is recommended that legs and feet be
covered to protect from flying debris during operation.
Inspect the entire machine for loose parts (nuts, bolts, screws, etc.)and any damage. Repair or
replace as necessary before using the machine. DO NOT USE any attachment with this power
head other than the ones recommended by our company. Serious injury to the operator or
bystanders could result as well as damage to the machine.
Keep the handles free from oil and fuel.
Always use proper handles and shoulder strap when cutting.
Do not smoke while mixing fuel or filling tank.
Do not mix fuel in an enclosed room or near open flames. Assure adequate ventilation.
Always mix and store the fuel in a properly marked container that is approved by local codes and
ordinances for such usage.
Never remove the fuel tank cap while the engine is running.
Never start or run the engage inside a closed room or building. Fumes from the exhaust contain
dangerous carbon monoxide.
Never attempt to make engine adjustments while the unit is running and strapped to the operator.
Always make engine adjustments with the unit resting on a flat, clear surface.
Do not use the unit if it is damaged or poorly adjusted. Never remove the machine’s guard.
Serious injury to the operator or bystanders could result as well as damage to the machine.
Inspect the area to be cut and remove all debris that could become entangled in the nylon
cutting head. Also remove any objects that the unit may throw during cutting.
Keep children away. Onlookers should be kept at a safe distance from the work area, at least 15
meters (50 FEET).
Never leave the machine unattended.
Do not use this unit for any job other than those for which it is intended as described in this
manual.
Do not overreach. Keep proper footing and balance at all times. Do not run the unit while
standing on a ladder or on any other unstable footing location.
Keep hands and feet clear of the nylon cutting head or blade while unit is in use.
Do not use this type of machine for sweeping away debris.
Do not use the unit when you are tired, ill or under the influence of medication ,drugs or alcohol.
Use nylon cutting head which is free of damage. If a stone or any other obstacle is hit, stop the
engine and check the nylon cutting head. A broken or unbalanced nylon cutting head must never
be used.
Do not store in a closed area where fuel vapors can reach an open flame from hot water heaters,
furnaces, etc. Store in a locked, well-ventilated area only.
Ensure safe and proper performance of your product. These part are available from your dealer.
The use of any other accessories or attachments may cause a potential hazard or injury to the
user, damage to the machine and void this warranty.
Clean the machine completely, especially, the fuel tank, its surroundings, and the air cleaner.
When refueling, be sure to stop the engine and confirm that it is cooled down.. Never refuel
when the engine is running or hot. When gasoline spills, be sure to wipe it up completely dispose
Summary of Contents for HDBT32
Page 27: ...25...
