3-182
Inser t O-ring 48
×
4 into the space
between output flange and shaft.
Fix output flange (1) by means of washer
(2) and hexagon screws.
Oil hexagon screws before the assembly.
·
Tightening torque (M10/8.8
×
30) :
4.69 kgf
·
m (33.9 lbf
·
ft)
It is always necessary to use new
hexagon screws.
Mount cylindrical screw with washer (3)
for stop of the parking brake setting
screw.
·
Tightening torque (M10/8.8
×
16) :
4.89 kgf
·
m (35.4 lbf
·
ft)
③
※
※
Fix brake disk (1) at output flange by
means of hexagon screws (2) and
washers.
·
Tightening torque (M10/10.9 × 25) :
6.93 kgf
·
m (50.2 lbf
·
ft)
Connect HP pump on port (see arrow)
and apply approx. 80 bar pressure to
parking brake (3) and bring it in contact
position.
HP hand-operated pump 5870 287 007
MINIMESS coupling
5870 950 101
④
7609ATM338
7609ATM339
3
3
1
1
2
2
Press screen sheet (1) onto the input
flange (2).
Mount output flange (2) until contact is
obtained.
②
7609ATM337
1
2
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...
