3-191
REASSEMBLY
REASSEMBLY
Inductive sensor, Hall sensor, breather,
Inductive sensor, Hall sensor, breather,
oil filler and oil drain plug
oil filler and oil drain plug
Mount inductive sensors (1, 2 and 3) with
O-rings 15
×
2.
1 Inductive sensor - turbine speed
2 Inductive sensor - speed/central gear
chain
3 Inductive sensor - engine speed
·
Tightening torque :
3.06 kgf
·
m (22.1 lbf
·
ft)
Mount breather (4).
·
Tightening torque :
1.22 kgf
·
m (8.85 lbf
·
ft)
Mount speed sensor (5) with O-ring 15.54
×
2.62 and fix it by means of cylindrical
screw (6).
1 speed sensor (hall sensor) -
output speed
·
Tightening torque (M8/8.8
×
16) :
2.35 kgf
·
m (17.0 lbf
·
ft)
Mount screw plug M26
×
1.5 (7) with
O-ring 23
×
2.
·
Tightening torque (M8/8.8
×
16) :
8.16 kgf
·
m (59.0 lbf
·
ft)
Bring cover (8) with seal into contact
position with the housing front part and fix
it by means of hexagon screws (9).
·
Tightening torque (M8/8.8
×
18) :
2.35 kgf
·
m (17.0 lbf
·
ft)
Mount oil drain plug with O-ring 35
×
2 (1).
·
Tightening torque (M38
×
1.5) :
8.16 kgf
·
m (59.0 lbf
·
ft)
Bring oil level tube (2) with seal into
contact position with the housing front part
and fix it by means of hexagon screws (3).
·
Tightening torque (M8/8.8
×
50) :
3.47 kgf
·
m (25.1 lbf
·
ft)
Fasten dipstick (4) in oil level tube.
Fix identification plate (5) to the housing
front part.
Use loctite (type No. MS 9360).
13)
13)
(1)
(2)
※
7609ATM366
7609ATM367
1
2
3
4
7
1
8
9
5
6
5
4
2
3
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...
