4-21
OPERATION
OPERATION
Purpose
Purpose
The pressure switches are used to visually or audibly warn the driver of the pressure within the
system.
Make contact / circuit closer
Make contact / circuit closer
The pressure switch can be fitted in the braking system or directly on one of its components.
The system pressure acts on an absorption area within the switch, making an electrical contact
as the pressure on that area is increased. The resulting current is used to activate a warning
facility, for instance.
Break contact / circuit breaker
Break contact / circuit breaker
The pressure switch can be fitted in the braking system or directly on one of its components.
The system pressure acts on a absorption area within the switch, breaking an electrical contact
as the pressure on that area is increased. The current is now broken, e.g. to deactivate a warning
facility.
Installation requirements
Installation requirements
No special measures need to be taken.
Maintenance of the pressure switch
Maintenance of the pressure switch
No special maintenance beyond the legal requirements is necessary.
When using high-pressure cleaners on the vehicle, please make sure that the water jet is not
directed at the pressure switch (corrosion of contacts).
Repair work
Repair work
When working on the braking system, always make sure that there is absolutely no
pressure in the system. Even when the engine is switched off there will be some residual
pressure in the system.
When doing repair work, make sure your environment is very clean.
Immediately close all open ports on the components and on pipes using plugs.
For safety reasons the pressure switch needs to be replaced as a whole if damaged.
(1)
(1)
(2)
(2)
(3)
(3)
(4)
(4)
(5)
(5)
(6)
(6)
※
※
2)
2)
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...
