6-19
1
2
4
6
10
21
20
12
L1
X
B
S
L
LS pressure
14
15
22
16
17
18
23 13
19
24
LS pressure oil
System pressure oil
Return oil
10
4
12
13
75796WE36
When the hydraulic system stalls under load or when the cylinders reach the end of the stroke, the
main system pressure increases. But LS pressure (19) is regulated by LS relief valve on steering
system and loader system. The pressure difference between discharged pump and LS pressure
equal to spring (18). It means no flow is necessary. Therefore, discharged pressure push flow
compensator spool (13) left . Supply oil now flows past flow compensator spool (13) and through
passage (23). The oil flows past flow compensator spool (13) and into passage (22). The oil then
flows to control piston (10).
Pump swash plate (2) will be minimum displacement if the operator does not turn the steering
wheel and RCV, then the pump will return to low pressure standby.
High pressure stall
(4)
1
Drive shaft
2
Swash plate
4
Counter piston
6
Counter spring
10 Control piston
12 Pressure compensator spool
13 Flow compensator spool
14 Case drain
15 Passage
16 Passage
17 Spring
18 Spring
19 LS line from the metering pump
20 Cavity
21 Passage
22 Passage
23 Cavity
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...
