6-48
Problem
Cause
Remedy
No steering or hydraulic
function
Low oil level.
Failed hydraulic pump.
Add recommended oil.
Remove and inspect return filter for
metal pump particles.
No hydraulic functions
steering normal
Failed hydraulic pump.
Failed line filter.
Faulty safety valve.
Stuck open port relief valve.
Remove and inspect return filter for
metal pump particles, or replace the
pump.
Remove and inspect line filter for RCV.
Safety valve leakage test or ON, OFF
function test.
Replace relief valve.
Boom float function
does not work
Low pilot control pressure.
Faulty pilot control valve (RCV).
Loader control valve (MCV) spool
binding in bore.
Do pressure reducing valve pressure
test in group 3.
Replace relief valve.
Do pressure reducing valve pressure
test in group 3.
One hydraulic function
does not work.
Faulty pilot control valve (RCV).
Stuck open port relief valve.
Oil leaking past cylinder packings.
Blockage in oil lines or valve.
Loader control valve (MCV) spool stuck
in bore.
Do pilot control valve pressure test.
Inspect and repair valve.
Replace relief valve.
Do boom and bucket cylinder leakage
test in group 3.
Inspect lines for damage.
Disconnect and inspect lines for internal
blockage.
Inspect and repair valve.
Low hydraulic power
Leakage within work circuit.
Low system relief valve (main relief
valve) setting.
Low port relief valve setting.
Leaking system relief valve.
Worn hydraulic pump.
Faulty pilot control valve (RCV).
Do cylinder drift check in group 2.
Do loader system and port relief valve
pressure test in group 3.
Do loader system and port relief valve
pressure test in group 3.
Remove and inspect valve.
Do hydraulic pump performance check
in group 2.
Do pilot control valve pressure test in
group 3.
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...
