3-42
Fault code
J1939 SPN
J1939 FMI
Reason
Effect (only when fault code is active)
3242
3363
7
Aftertreatment diesel exhaust fluid tank heater -
Mechanical system not responding or out of
adjustment. The aftertreatment diesel exhaust
fluid temperature did not increase when the
aftertreatment diesel exhaust fluid tank heater
was commanded ON.
Possible reduced engine performance.
3243
3060
18
Engine cooling system monitor - Data valid but
below normal operating range - Moderately
severe level. The engine is not warming up as
expected.
None on performance.
3251
4765
16
Aftertreatment diesel oxidation catalyst intake
temperature - Data valid but above normal
operating range - Moderately severe level.
The diesel oxidation catalyst intake temperature
sensor reading has exceeded the maximum
temperature limit.
Progressive power and/or speed derate
increasing in severity from time of alert. If the
Engine protection shutdown feature is enabled,
the engine will shut down 30 seconds after the
red STOP lamps starts flashing.
3253
3242
16
Aftertreatment diesel particulate filter intake
temperature - Data valid but above normal
operating range - Moderately severe level.
The aftertreatment diesel particulate filter intake
temperature sensor reading has exceeded the
maximum engine protection temperature limit.
Progressive power and/or speed derate
increasing in severity from time of alert. If the
Engine protection shutdown feature is enabled,
the engine will shut down 30 seconds after the
red STOP lamps starts flashing.
3254
3242
15
Aftertreatment diesel particulate filter intake
temperature - Data valid but above normal
operating range - Least severe level.
The aftertreatment diesel particulate filter intake
temperature sensor reading has exceeded the
maximum engine protection temperature limit.
Possible reduced engine performance.
3255
3246
16
Aftertreatment diesel particulate filter outlet
temperature - Data valid but above normal
operating range - Moderately severe level.
The aftertreatment diesel particulate filter outlet
temperature sensor reading has exceeded the
maximum engine protection temperature limit.
Progressive power and/or speed derate
increasing in severity from time of alert. If the
engine protection shutdown feature is enabled,
the engine will shut down 30 seconds after the
red STOP lamps starts flashing.
3256
3246
15
Aftertreatment diesel particulate filter outlet
temperature - Data valid but above normal
operating range - Least severe level.
The aftertreatment diesel particulate filter outlet
temperature sensor reading has exceeded the
maximum engine protection temperature limit.
Possible reduced engine performance.
3258
4340
5
Aftertreatment diesel exhaust fluid line heater 1
circuit - Current below normal or open circuit.
Open circuit detected in the diesel exhaust fluid
line heater 1.
Possible reduced engine performance.
3261
4342
5
Aftertreatment diesel exhaust fluid line heater 2
circuit - Current below normal or open circuit.
Open circuit detected in the diesel exhaust fluid
line heater 2.
Possible reduced engine performance.
※
Some fault codes are not applied to this machine.
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...
