Buttons and Functions
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the
How to Use Basic Functions
section of this manual.
ON/OFF
SET
Turns the unit on or off.
MODE
OK
TIMER
BREEZE AWAY
CLEAN
LED
Turbo
ECO/GEAR
Scrolls through operation modes
as follows:
AUTO
COOL
DRY
HEAT
FAN
FAN SPEED
SWING
Model:
Increases temperate in
1°C (1°F) increments.
Max. temperature is
30°C (86°F).
NOTE: Press together &
buttons at the same time
for 3 seconds will alternate
the temperature display
between the °C & °F.
TEMP
TEMP
04
RG10A2(F2S/H2S/G2S)/BGEFU1
RG10A10(F2S/G2S/H2S)/BGEF(20-28 C/68-82 F)
RG10A(F2S/H2S/G2S)/BGEF, RG10Y2(F2S)/BGEF,RG10A(F2S/H2S/G2S)/BGEFU1
( Fresh feature is not available)
RG10A2(F2S/H2S/G2S)/BGCEFU1, RG10A2(F2S/H2S/G2S)/BGCEF
(Cooling only models, AUTO mode and HEAT mode are not available)
Used to confirm the selected
functions
Decreases temperature
O
O
in 1 C(1 F) increments.
Min. temperature is
O
O
O
O
16 C(60 F).
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
This feature avoids direct air flow
blowing on the body and makes
you feel indulging in silky coolness.
NTOE:
This feature is available
under cool, Fan and Dry mode only
Set timer to turn unit on or off
NOTE:
HEAT mode is not supported
by the cooling only appliance.
ECO GEAR(75%)
GEAR(50%)
mode ECO
......
Scrolls through operation
functions as follows:
Fresh( ) Sleep( )
Follow Me( )
AP mode( ) Fresh...
The selected symbol will
flash on the display area,
press the OK button to
confirm.
Selects fan speeds in the
following order: AU
20%
60%
40%
80% 100%.
Press the TEMP or button
to increase/decrease the fan
speed in 1% increments.
Enables unit to reach preset
temperature in shortest
possible time
Previous setting
Used to start/stop the Self
Clean or Active Clean function.
(Model dependent, please refer
to the USER’S OPERATION &
INSTALLATION MANUAL).
Turns indoor unit’s LED display
and air conditioner buzzer on and
off (model dependent), which
create a comfortable and quiet
environment.
Press this button to enter the
energy efficient mode in a
sequence of following:
