8-186
8-186
Cleaning of parts
Put all parts in rough cleaning vessel
filled with kerosene and clean them
(rough cleaning).
If dirty part is cleaned with kerosene just
after putting it in vessel, it may be
damaged. Leave it in kerosene for a
while to loosen dust and dirty oil.
If this kerosene is polluted, parts will be
damaged and functions of reassembled
valve will be degraded.
Therefore, control cleanliness of
kerosene fully.
Put parts in final cleaning vessel filled
with kerosene, turning it slowly to clean
them even to their insides (finish
cleaning).
Do not dry parts with compressed air,
since they will be damaged and/or rusted
by dust and moisture in air.
Rust prevention of parts
Apply rust-preventives to all parts.
If left as they after being cleaned, they will
be rusted and will not display their
functions fully after being reassembled.
(15)
(16)
ö
Η
ö
ö
Θ
ö
Summary of Contents for HX145 LCR
Page 11: ...SECTION 1 GENERAL SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10...
Page 204: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV...
Page 627: ...8 155 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29...
Page 657: ...8 185 8 185 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10...
