background image

0-8

TEMPERATURE

Fahrenheit-Centigrade Conversion.  
A simple way to convert a fahrenheit temperature reading into a centigrade temperature reading or vice verse 
is to enter the accompanying table in the center or boldface column of figures.
These figures refer to the temperature in either Fahrenheit or Centigrade degrees.
If it is desired to convert from Fahrenheit to Centigrade degrees, consider the center column as a table of 
Fahrenheit temperatures and read the corresponding Centigrade temperature in the column at the left.
If it is desired to convert from Centigrade to Fahrenheit degrees, consider the center column as a table of 
Centigrade values, and read the corresponding Fahrenheit temperature on the right.

 

˚C

  

˚F

 

˚C

  

˚F

 

˚C

  

˚F

 

˚C

  

˚F

 -40.4 

-40 

-40.0  -11.7 

11 

51.8 

7.8 

46 

114.8  27.2 

81 

117.8

 -37.2 

-35 

-31.0  -11.1 

12 

53.6 

8.3 

47 

116.6  27.8 

82 

179.6

 -34.4 

-30 

-22.0  -10.6 

13 

55.4 

8.9 

48 

118.4  28.3 

83 

181.4

 -31.7 

-25 

-13.0  -10.0 

14 

57.2 

9.4 

49 

120.2  28.9 

84 

183.2

 -28.9 

-20 

-4.0 

-9.4 

15 

59.0 

10.0 

50 

122.0  29.4 

85 

185.0

 -28.3 

-19 

-2.2 

-8.9 

16 

60.8 

10.6 

51 

123.8  30.0 

86 

186.8

 -27.8 

-18 

-0.4 

-8.3 

17 

62.6 

11.1 

52 

125.6  30.6 

87 

188.6

 -27.2 

-17 

1.4 

-7.8 

18 

64.4 

11.7 

53 

127.4  31.1 

88 

190.4

 -26.7 

-16 

3.2 

-6.7 

20 

68.0 

12.8 

55 

131.0  32.2 

90 

194.0

 -26.1 

-15 

5.0 

-6.7 

20 

68.0 

12.8 

55 

131.0  32.2 

90 

194.0

 -25.6 

-14 

6.8 

-6.1 

21 

69.8 

13.3 

56 

132.8  32.8 

91 

195.8

 -25.0 

-13 

8.6 

-5.6 

22 

71.6 

13.9 

57 

134.6  33.3 

92 

197.6

 -24.4 

-12 

10.4 

-5.0 

23 

73.4 

14.4 

58 

136.4  33.9 

93 

199.4

 -23.9 

-11 

12.2 

-4.4 

24 

75.2 

15.0 

59 

138.2  34.4 

94 

201.2

 -23.3 

-10 

14.0 

-3.9 

25 

77.0 

15.6 

60 

140.0  35.0 

95 

203.0

 -22.8 

-9 

15.8 

-3.3 

26 

78.8 

16.1 

61 

141.8  35.6 

96 

204.8

 -22.2 

-8 

17.6 

-2.8 

27 

80.6 

16.7 

62 

143.6  36.1 

97 

206.6

 -21.7 

-7 

19.4 

-2.2 

28 

82.4 

17.2 

63 

145.4  36.7 

98 

208.4

 -21.1 

-6 

21.2 

-1.7 

29 

84.2 

17.8 

64 

147.2  37.2 

99 

210.2

 -20.6 

-5 

23.0 

-1.1 

35 

95.0 

21.1 

70 

158.0  51.7 

125 

257.0

 -20.0 

-4 

24.8 

-0.6 

31 

87.8 

18.9 

66 

150.8  40.6 

105 

221.0

 -19.4 

-3 

26.6 

32 

89.6 

19.4 

67 

152.6  43.3 

110 

230.0

 -18.9 

-2 

28.4 

0.6 

33 

91.4 

20.0 

68 

154.4  46.1 

115 

239.0

 -18.3 

-1 

30.2 

1.1 

34 

93.2 

20.6 

69 

156.2  48.9 

120 

248.0

 -17.8 

32.0 

1.7 

35 

95.0 

21.1 

70 

158.0  51.7 

125 

257.0

 -17.2 

33.8 

2.2 

36 

96.8 

21.7 

71 

159.8  54.4 

130 

266.0

 -16.7 

35.6 

2.8 

37 

98.6 

22.2 

72 

161.6  57.2 

135 

275.0

 -16.1 

37.4 

3.3 

38 

100.4 

22.8 

73 

163.4  60.0 

140 

284.0

 -15.6 

39.2 

3.9 

39 

102.2 

23.3 

74 

165.2  62.7 

145 

293.0

 -15.0 

41.0 

4.4 

40 

104.0 

23.9 

75 

167.0  65.6 

150 

302.0

 -14.4 

42.8 

5.0 

41 

105.8 

24.4 

76 

168.8  68.3 

155 

311.0

 -13.9 

44.6 

5.6 

42 

107.6 

25.0 

77 

170.6  71.1 

160 

320.0

 -13.3 

46.4 

6.1 

43 

109.4 

25.6 

78 

172.4  73.9 

165 

329.0

 -12.8 

48.2 

6.7 

44 

111.2 

26.1 

79 

174.2  76.7 

170 

338.0

 -12.2 

10 

50.0 

7.2 

45 

113.0 

26.7 

80 

176.0  79.4 

172 

347.0

Summary of Contents for HX220AL










































Reviews: