1-21
Model
Type
Boom
Arm
Counterweight
Shoe
Wheel
Dozer
Outrigger
HX400LT3
MONO
BOOM
Length [mm] Length [mm] weight [kg]
width [mm]
width [mm] Front Rear Front Rear
6500
3200
6200
600
-
-
-
-
-
A
B
·
: Rating over-front
: Rating over-side or 360 degree
·
Note 1.
2.
3.
4.
Lifting capacity are based on ISO 10567.
Lifting capacity of the HX series does not exceed 75% of tipping load with the machine on firm,
level ground or 87% of full hydraulic capacity.
The Lift-point is bucket pivot mounting pin on the arm (without bucket mass).
*
Indicates load limited by hydraulic capacity.
Lift-point
height (A)
Lift-point radius (B)
At max. reach
3.0 m (9.8 ft)
4.5 m (14.8 ft)
6.0 m (19.7 ft)
7.5 m (24.6 ft)
9.0 m (29.5 ft)
Capacity
Reach
m (ft)
9.0 m
kg
*8330
*8330
6.52
(29.5 ft)
lb
*18360
*18360
(21.4)
7.5 m
kg
*8790
7710
*7740
7130
7.82
(24.6 ft)
lb
*19380
17000
*17060
15720
(25.7)
6.0 m
kg
*9680
*9680
*9010
7590
*7570
5870
8.67
(19.7 ft)
lb
*21340
*21340
*19860
16730
*16690
12940
(28.4)
4.5 m
kg
*14200
*14200
*11230
10380
*9750
7310
8830
5390
*7670
5190
9.19
(14.8 ft)
lb
*31310
*31310
*24760
22880
*21500
16120
19470
11880
*16910
11440
(30.2)
3.0 m
kg
*18040
14800
*13050
9710
*10700
6960
8660
5230
8010
4830
9.44
(9.8 ft)
lb
*39770
32630
*28770
21410
*23590
15340
19090
11530
17660
10650
(31.0)
1.5 m
kg
*18170
13780
*14600
9140
11220
6650
8480
5070
7870
4710
9.45
(4.9 ft)
lb
*40060
30380
*32190
20150
24740
14660
18700
11180
17350
10380
(31.0)
0.0 m
kg
*19360
13400
*15470
8790
10970
6430
8370
4970
8090
4810
9.21
(0.0 ft)
lb
*42680
29540
*34110
19380
24180
14180
18450
10960
17840
10600
(30.2)
-1.5 m
kg
*12640
*12640
*20840
13360
15410
8670
10870
6340
8770
5190
8.70
(-4.9 ft)
lb
*27870
*27870
*45940
29450
33970
19110
23960
13980
19330
11440
(28.5)
-3.0 m
kg
*20920
*20920
*19230
13530
*14600
8740
10960
6410
10230
6030
7.87
(-9.8 ft)
lb
*46120
*46120
*42390
29830
*32190
19270
24160
14130
22550
13290
(25.8)
-4.5 m
kg
*21490
*21490
*16120
13950
*12130
9040
*10550
7940
6.60
(-14.8 ft)
lb
*47380
*47380
*35540
30750
*26740
19930
*23260
17500
(21.7)
※
Lifting capacities are based upon a standard machine conditions.
Lifting capacities are based upon a standard machine conditions.
Lifting capacities will vary with different work tools, ground conditions and attachments.
Lifting capacities will vary with different work tools, ground conditions and attachments.
The difference between the weight of a work tool attachment must be subtracted.
The difference between the weight of a work tool attachment must be subtracted.
Consult with your local Hyundai dealer regarding the lifting capacities for specific work tools
Consult with your local Hyundai dealer regarding the lifting capacities for specific work tools
and attachments.
and attachments.
Failure to comply to the rated load can cause serious injury, death, or property damage. Make
Failure to comply to the rated load can cause serious injury, death, or property damage. Make
adjustments to the rated load as necessory for non-standard configurations.
adjustments to the rated load as necessory for non-standard configurations.
