1-24
Model
Type
Boom
Arm
Counterweight
Shoe
Wheel
Dozer
Outrigger
HX400
NLT3
MONO
BOOM
Length [mm] Length [mm] weight [kg]
width [mm]
width [mm] Front Rear Front Rear
6500
2550
7000
600
-
-
-
-
-
A
B
·
: Rating over-front
: Rating over-side or 360 degree
·
Lift-point
height (A)
Lift-point radius (B)
At max. reach
3.0 m (9.8 ft)
4.5 m (14.8 ft)
6.0 m (19.7 ft)
7.5 m (24.6 ft)
Capacity
Reach
m (ft)
9.0 m
kg
*10560
10560
5.83
(29.5 ft) lb
*23280
23280
(19.1)
7.5 m
kg
*9940
*9940
*9950
7300
7.25
(24.6 ft) lb
*21910
*21910
*21940
16090
(23.8)
6.0 m
kg
*10710
9830
*9850
6850
*9780
5890
8.16
(19.7 ft) lb
*23610
21670
*21720
15100
*21560
12990
(26.8)
4.5 m
kg
*16000
14130
*12200
9270
*10450
6610
9650
5160
8.71
(14.8 ft) lb
*35270
31150
*26900
20440
*23040
14570
21270
11380
(28.6)
3.0 m
kg
*13890
8660
*11280
6310
9060
4790
8.98
(9.8 ft)
lb
*30620
19090
*24870
13910
19970
10560
(29.5)
1.5 m
kg
*15180
8200
11710
6050
8930
4680
8.99
(4.9 ft)
lb
*33470
18080
25820
13340
19690
10320
(29.5)
0.0 m
kg
*14960
11970
*15700
7960
11530
5890
9240
4810
8.73
(0.0 ft)
lb
*32980
26390
*34610
17550
25420
12990
20370
10600
(28.7)
-1.5 m kg
*20160
12040
*15340
7930
11510
5870
10150
5260
8.20
(-4.9 ft) lb
*44450
26540
*33820
17480
25380
12940
22380
11600
(26.9)
-3.0 m kg
*22990
*22990
*18020
12290
*13890
8080
*10660
6260
7.31
(-9.8 ft) lb
*50680
*50680
*39730
27090
*30620
17810
*23500
13800
(24.0)
-4.5 m kg
*13990
12800
*10120
8720
5.92
(-14.8 ft) lb
*30840
28220
*22310
19220
(19.4)
Note 1.
2.
3.
4.
Lifting capacity are based on ISO 10567.
Lifting capacity of the HX series does not exceed 75% of tipping load with the machine on firm,
level ground or 87% of full hydraulic capacity.
The Lift-point is bucket pivot mounting pin on the arm (without bucket mass).
*
Indicates load limited by hydraulic capacity.
※
Lifting capacities are based upon a standard machine conditions.
Lifting capacities are based upon a standard machine conditions.
Lifting capacities will vary with different work tools, ground conditions and attachments.
Lifting capacities will vary with different work tools, ground conditions and attachments.
The difference between the weight of a work tool attachment must be subtracted.
The difference between the weight of a work tool attachment must be subtracted.
Consult with your local Hyundai dealer regarding the lifting capacities for specific work tools
Consult with your local Hyundai dealer regarding the lifting capacities for specific work tools
and attachments.
and attachments.
Failure to comply to the rated load can cause serious injury, death, or property damage. Make
Failure to comply to the rated load can cause serious injury, death, or property damage. Make
adjustments to the rated load as necessory for non-standard configurations.
adjustments to the rated load as necessory for non-standard configurations.
