background image

37

Warranty Claim Procedure

Warranty service must be performed by one of our authorized service dealers. 
Do not return your product where purchased. If you feel your generator is 
malfunctioning due to a defect or misuse, simply contact our customer support 
center for technical advice, a warranty claim or general information. Warranty 
service, operation assistance and product support is provided by Midland Power 
Inc., contact us at the numbers below. 

Product Registration Instructions

Product registration is required for product support and warranty coverage. You can 
register online at www.hyundaipower.ca. Once your registration is complete, your 
receipt will be on file and any future warranty claims will be easily created. If you 
wish, you can confirm your registration by calling customer service at    
1-877-528-3772 or by e-mail at support@hyundaipower.ca

Proof of purchase may be required for warranty claims. Keep a copy of the original 
receipt, UPC code and serial number with this user guide.

Customer Service

Toll Free: 1-877-528-3772

E-mail: support@hyundaipower.ca

Online: www.hyundaipower.ca

Summary of Contents for HY2000SI















































Reviews: