background image

1

1. 

SAFETY INFORMATION

Before use of the machine please read carefully this manual

Any use of the generator without reading this manual could cause hard 
damage to the machine o can hurt yourself seriously

Pay special attenction to the next:

• 

Do not use the generator in a non ventilated area

• 

Do not use the generators in wet conditions

• 

Do not start the generator when device plug.

• 

Keep at least 1 meters from flammable objects

• 

Do not refill the fuel tank with the generator running

• 

Do not smoke when fuel  refill

• 

Do not overfill the fuel

SAFETY GUARDS:

1. 

Do not use kerosene or other fuel, only use gasoline fuel. 

Clean all the excess of fuel when refill.

2. 

Any flammable or explosive product shall be kept away from 

the generator, due to the high temperature of the engine.

3. 

Install your group on a flat, horizontal surface, to avoid spilla-

ge of gasoline.

4. 

Inhalation of exhaust gas:

The exhaust gases contain poisonous carbon monoxide. Never 
use the group in a poorly ventilated area

5. 

Never touch the exhaust when the generator is running or 

after starting.

6. Short 

circuits:

Do not touch your group with wet hands. The generator is not 
waterproof, so it should not be exposed to water or snow.

7. 

Other safety points:

Yon must know how to absolutely stop your group before using it. 
Never allow someone to use the generator without having read the 
manual! Always wear a safety shoes and keep you always ready to 
clean rags. Keep children and pets away

Summary of Contents for HY2500 HY3100

















Reviews: