12
WARNING
Service and maintenance must be performed by an authorised agent.
DO NOT tamper with, or attempt to adjust the pressure switch or safety valve.
Before moving or carrying out any maintenance on the compressor, make sure that
the ignition switch is OFF and the air tank pressure has been vented and the
compressor allowed to cool down for a period of time.
8.0
You should drain the tank at the end of each day.
8.1
Place a suitable container capable of holding water, underneath the compressor.
8.2
With compressed air in the tank, slowly turn the drain knob to the open position.
The water in the tank will drain out.
8.3
Once the water has drained, turn the drain knob to the closed position.
8.4
Draining the tank reduces the risk of corrosion inside the tank.
8.5
The air filter is designed to reduce noise and help prevent particulates in the air from
entering and damaging the air compressor.
8.6
After being used for a period of time, the air filter will become clogged.
This will reduce the air intake capabilities of the compressor, reducing performance.
Therefore, the air filter must be cleaned or replaced regularly.
8.7
Open the cover on the air filter and remove the filter element.
8.8
Inspect the filter element and if damaged or worn, replace immediately.
8.8
Blow the dirt from the air filter from the inside out.
You can use a low pressure airline to do this.
8.9
Reinstall the air filter.
8.10
A small leak in any hose or connection will reduce the air compressors performance.
8.11
To test for leaks, spray a small amount of soapy water on the area suspected of
leaking.
If soap bubbles appear, replace the broken part.
8. MAINTENANCE
DRAINING THE AIR TANK
AIR FILTER
LEAK TESTING
