background image

7

 

3.31 

FUELING/DE-FUELING (where applicable). 

3.32 

CAUTION 

  ALL FUELS ARE FLAMMABLE 

3.33 

ALWAYS

 fuel and defuel in a well-ventilated area outside of buildings.

 

3.34 

ALWAYS

 wear correct, suitable and fit for purpose Personal Protective Equipment (PPE), 

suggested items are but not limited to safety gloves and overalls. 

3.35 

When fueling/de-fueling 

ALWAYS

 avoid inhaling fumes.

 

3.36 

When de-fueling 

ALWAYS

 use a propriety fuel retriever.

 

3.37 

    

ALWAYS

 carry fuel in the correct and clearly marked container.

 

3.38 

ELECTRICAL SAFETY (where applicable).

 

3.39 

Electricity can kill - 

NEVER

 work on LIVE/ENERGISED equipment.

 

3.40 

Prior to carrying out any maintenance work you 

MUST

 Identify electrical isolation 

methods and isolate all electrical supplies,

 

3.41 

Prior to use and with all electrical supplies isolated You  

MUST

 check all electrical 

cables, plugs and connections for the following;

 

3.42 

Are intact and have no signs of damage, to include but not limited to bare wires, 
chaffing, cuts and loose wiring.

 

3.43 

If there are any signs of damage, the damaged item 

MUST

 be taken out of service until 

the damage has been repaired by an electrically competent person.

 

3.44 

All trailing cables should be routed so as not to cause any kind of trip hazard.

 

3.45 

NEVER

 work on or near electricity with wet hands, wet clothing, and wet gloves.

 

Summary of Contents for HY3000CI





































Reviews: